For any cooling towers that help to allow air condition systems to function in Fort Lauderdale, they will always need quality cooling tower cleaning in order to run smoothly and with no errors. Cooling towers are heat exchangers that are structurally designed to bring air and water into direct contact with one another in order to reduce the temperature of the water. This simple yet complicated process takes place when a small volume of water is evaporated. And when this evaporation occurs, it results in the reduction of the temperature of the water that’s moved throughout the tower. Cooling towers are most commonly used in large buildings such as manufacturing factories, power plants, and refinement plants across the country.
In hotter regions throughout the Southeast US, very much like where Fort Lauderdale resides, immense buildings of many sorts rely on cooling towers in their AC systems. Office, schools, and hospitals in Fort Lauderdale will use cooling towers to make sure that their building is kept as comfortable and safe as possible. At Clean Sweep Hydroblasting, we take full advantage of highly-pressurized water to make sure that your cooling tower is clean and running at its max efficiency.
What’s The Importance Of Cooling Tower Cleaning In Fort Lauderdale?
One of the most imperative procedures involved in property maintenance, for any building with an AC system that relies on cooling towers, is cooling tower cleaning itself. In Fort Lauderdale, there are a plethora of massive commercial buildings of all sizes. And due to the way some of these building’s towers function, they provide the perfect setting for the birth and development of countless bacteria. And for a few among them, there exist the Legionella bacteria – an organism that is sometimes evident in dirty cooling towers.
Once you’re exposed to Legionella bacteria, you’re very likely going to contract a few illnesses. One among them is called Legionnaire’s disease, a condition that’s very similar to pneumonia. And additionally, exposure to this disease could also likely result in the contraction of another disease called Pontiac Fever; a sickness that’s much similar to the flu.
Due to these potential health risk factors, big building property managers often work hard to ensure their cooling towers are cleaned twice a year to protect the well-being of the building’s occupants. And on that same note, cooling tower maintenance is needed by the Occupational Safety And Health Administration, or OSHA. In the OSHA Technical Manual or the OTM, it’s stated that all cooling towers should be thoroughly disinfected and cleaned at least two times per year.
And lastly, a dirty cooling tower will mean that your tower isn’t performing at its max efficiency. And once they become dirty or overpopulated with bacteria, you’ll be overworking your AC system. This will result in your cooling tower having to rely on more energy to become fully operational. And then in return, higher operating costs will be required for the tower itself as well as cause a hot and uncomfortable building for the occupants.
How Does Clean Sweep Hydroblasting Perform Cooling Tower Cleaning In Fort Lauderdale?
Our professional hyrdoblasting services are utilized with high-pressure water blasting so that they can clean and disinfect the surfaces within cooling towers. By cleaning these towers with the use of high-pressure water blasting, your cooling towers will get the most thorough and effective cooling tower maintenance method. The pressurized jets from our hydroblasting hoses are adjustable, so when we come to your property, we can adjust it to accurately direct their force onto dirty areas of the cooling tower. And the water pressure can also be adjusted to remove all debris and contaminants from the thermal surfaces. Generally, when it comes to cooling tower maintenance, water blasting is the most efficient and ideal way to get the job done.
What Are The Benefits Of Using Hydroblasting For Cleaning Cooling Towers?
Hiring a hydroblasting service to clean your cooling towers grants you many advantages. One of which is the fact that water can be dried and easily removed, which will reduce the chance of any negative effects impacting your towers. More so, compared to other methods, hydroblasting virtually leaves no room for error. Other alternative methods can likely leave behind many long-lasting negative impacts. For instance, when using harsh chemicals to clean your cooling towers, the abrasives used aren’t suitable for the material the tower is composed of. But with hydroblasting, there are only two things you’ll need to consider before cleaning. The first one is trying to figure out if the surface of the tower can handle the pressure of water blasting. And the other is if any electrical equipment is lying around that could get damaged with the introduction to moisture. In most cases, hydroblasting is perfectly safe for cleaning cooling towers.
Another great advantage gained from hiring a hydroblasting service for cooling tower cleaning is that its utilization can help to clean hard to reach areas. More often than not, cooling towers are constructed with small slits and holes that must be properly maintained in order to ensure full efficiency. Standard cooling tower cleaning methods are unable to reach these areas. Hydroblasting is capable of cleaning out nearly any contaminate in these small and difficult to clean areas.
Choose Clean Sweep Hydroblasting To Provide You With Cooling Tower Cleaning In Fort Lauderdale
When it comes to cooling tower cleaning in Fort Lauderdale, look no further than Clean Sweep Hydroblasting. We’ve been utilizing hydroblasting to clean cooling towers throughout Fort Lauderdale since before OSHA regulations were in place. Want to learn more about cooling tower cleaning in Fort Lauderdale? Give us a call at (561) 793-1509 or contact us online today.