Innovations in Hydroblasting and Hydrodemolition

Innovations in Hydroblasting and Hydrodemolition In the realm of construction and infrastructure maintenance, the significance of efficient and precise demolition techniques cannot be overstated. Traditional methods often come with drawbacks such as dust pollution, noise disturbance, and structural damage. However, the innovations in hydroblasting and hydrodemolition have revolutionized the industry, offering a cleaner, quieter, and […]

The Dynamics of Hydrodemolition Projects

The Dynamics of Hydrodemolition Projects Hydrodemolition, a technique utilizing high-pressure water jets to remove deteriorated concrete, has gained prominence in the construction industry for its effectiveness in various applications. Clean Sweep has been a leading provider of this highly technical method since its onset in the early 1990s. Like any construction method, hydrodemolition projects come […]

How to Choose a Hydrodemolition Contractor

Hydrodemolition Contractor- How to Choose When it comes to major projects, knowing how to choose a hydrodemolition contractor is essential. Hydrodemolition, a process that utilizes high-pressure water jets to remove deteriorated or damaged concrete, requires precision, expertise, and the right equipment. Choosing the right partner can make all the difference between a successful project and […]

Bridge Removal and Hydrodemolition: An Essential Pair

Bridge removal is a complex process that requires precision, efficiency, and safety. Over the years, various methods have been employed to dismantle old or damaged bridges. However, one technique has stood out for its effectiveness and environmental benefits – hydrodemolition. This innovative process uses high-pressure water jets to break down and remove concrete, providing a […]

The Importance of Water Quality to Hydrodemolition

There is more to hydrodemolition than just water pressure. Sure, pressure is important. But by maintaining good quality water throughout the process makes hydrodemolition an innovative eco-friendly construction practice. Here, we’ll discuss what makes it so important and why it is pivotal in the success of hydrodemolition. Hydrodemolition: An Eco-Friendly Construction Practice Before delving into […]

Your Go-To Industrial Hydroblasting Company

Top Of The Line Water Blasting Services At Clean Sweep, our industrial hydroblasting service operates with the highest pressure equipment available, often in the most diverse and time-sensitive situations. If not managed properly, hydroblasting has the potential to cause high-risk injuries. Our decades of experience can ensure that doesn’t happen. Never attempt these projects yourself- […]

Why Choose Hydroblasting for Surface Prep

Why Choose Hydroblasting for Surface Prep There are many aspects of hydroblasting that make it the ideal surface prep method. Below, we will outline what makes it so great and why you should choose hydroblasting for your surface prep needs. Important Hydroblasting Components First, the process begins with a high-pressure water pump that generates a […]

The Steady Growth of Hydroblasting

The Steady Growth of Hydroblasting Hydroblasting: A Steadily Growing Industry The hydroblasting industry is on the rise, growing steadily by the increasing demand for environmentally friendly and efficient cleaning solutions. Robotic hydroblasting, a cutting-edge technology that combines high-pressure water jetting with automation, is at the forefront of this growth. In this blog post, we’ll explore […]

Robotic Hydroblasting: A cutting edge solution

Robotic Hydroblasting: A cutting edge solution Robotic Hydroblasting In today’s fast-paced industrial world, efficiency and safety are paramount. As the water blasting and jetting industries seek more innovative ways to tackle tough challenges, robotic hydroblasting has emerged as a game-changer. This cutting-edge solution combines the power of high-pressure water with the precision and automation of […]

Surface Prep for Concrete Art

Surface Prep for Concrete Art It is so important for surfaces to be properly prepared for a multitude of construction reasons. Not only does it clean the area and rid it of anything harmful, but it creates the ideal adhesion surface for whatever coating is required. Every now and then, though, we need to surface […]

History of Hydroblasting

Hydroblasting: A History To fully appreciate the current water blasting industry, it is important to understand the history of hydroblasting. What began as a quick, convenient way to mine (Yes, that’s right, MINE), has become a revolutionary and irreplaceable service. First Historical Hydroblasting Uses Though the idea of using pressured water to clean is literally […]

Water Blasting PPE

Water Blasting PPE Through the pandemic, many of us have been better acquainted with the abbreviation for Personal Protective Equipment. Our industry would not be nearly as safe as it is without water blasting PPE. A safe hydroblaster is protected from head to toe. Physical protection combined with in-depth training is what makes hydroblasting and […]

Hydrodemolition Saves Time and Money

Hydrodemolition Saves Structures As of 2015, the state of Mississippi Department of Transportation has facilitated their bridge deck repairs by using hydrodemolition. Bridges themselves are sturdy and hold up well over time. The bridge deck, however, the part that thousands of motorists drive on everyday, can wear down. Bridge replacement would squander the perfectly good […]

The Power of Ultra High Pressure Water Blasting for Industrial Cleaning and Surface Prep

When it comes to industrial cleaning and surface preparation, traditional methods like sandblasting and chemical cleaning can be time-consuming and expensive. That’s where ultra high pressure water blasting comes in. This powerful technology uses water pressurized up to 40,000 psi to blast away even the toughest grime and coatings, making it a highly effective and […]

Meet Our Web Manager

The Last of Our Intro Series Our introduction series comes to a close by highlighting our Business Development and Web Manager, Emma Parker. Emma focuses on our online content while utilizing those networks to develop construction business relationships. We’ll tell you how this Louisiana native became a Florida hydroblasting business web manager. Keep an eye […]

Meet Our Sales Manager

Welcome back to our introduction series! Before we move on to getting to know our machines and equipment, let’s focus on the team that makes it all work. This week we highlight David Pugliese, the Clean Sweep Hydroblasting Sales Manager. Hydroblasting Sales Though he is our hydroblasting Sales Manager, you might say that David wears […]

Meet Our General Counsel

Hydroblasting Runs in the Family Up next in our introductory series is our hydroblasting General Counsel, Marlee Arnold! You may notice a common last name between Marlee and our CEO, and that’s because Clean Sweep Hydroblasting is a proud family business. Though her title is General Counsel, Marlee grew up alongside this business so she […]

Meet Our CEO

Who We Are Hydroblasting and hydrodemolition are complex, widely-applicable, and environmentally friendly methods of construction, cleaning, and preparation. Before we get into what we do, let’s take some time to get to know the team- the people and the machines! We are a small but incredibly mighty firm that is dedicated to our work and […]

Lesser-Known Uses For High-Pressure Hydroblasting

Lesser-Known Uses For High-Pressure Hydroblasting Hyrdoblasting is recognized for being a powerful tool that aids in the construction and demolition of most industrial projects. Its application is most helpful for when one needs total removal of unwanted deposits and other residues. For this reason, you’ll often see hydroblasting used to prepare surfaces and to clean […]

What Can You Clean With Hydroblasting?

Hydroblasting is a very versatile practice that can be utilized for a wide range of purposes. It’s often used for concrete demolition or surface preparation. But did you know that you can clean with hydroblasting? And if you’re completely unfamiliar with hydroblasting, it sounds strange it could clean anything. (Learn the basics here.)But continue reading […]

Hydroblasting For Cooling Tower Cleaning

We here at Clean Sweep Hydroblasting offer our hydroblasting services to assist in resolving a myriad of problems. And when it comes to cooling tower cleaning, we are always highly sought after. Cooling tower cleaning is essential in the maintenance of large-scale properties such as corporate buildings and hospitals. But if you happen to own […]

When Hydroblasting is Needed

As the manager of a manufacturing facility, director of a construction project, or even the owner of a large-scale property, you’ll be in charge of a wide set of responsibilities. Some of these responsibilities will be tasks that you deal with on the daily. Whereas others will end up being something that you’ve never dealt […]

Where is Hydrodemolition Best Used?

As the name implies, hydrodemolition is a form of construction that requires the use of highly pressurized water to assist in the tearing down of concrete. It’s a safe and cost-efficient practice that can assist tremendously in getting construction projects done with little to no problems. But if you’re managing a construction project and are […]

Why Use Hydroblasting For Pipes

Hydroblasting has proven to be one of the most optimal methods utilized to perform a variety of industrial tasks. If you need surface preparation done for equipment such as boilers or tanks, hydroblasting is guaranteed to get it done effectively. Or if you require demolition on a certain concrete structure – let’s say, a bridge […]

Water Blasting Applications

Water blasting is one of the most commonly adopted methods utilized by countless businesses for a variety of reasons. It’s a widespread operation that involves the use of a powerful abrasive water discharge that successfully blasts unwanted material or residue away due to its strength. And due to its efficiency, it sometimes only requires one […]

Choose Hydroblasting For Surface Preparation

Surface Preparation is an absolute necessity when it comes to any sort of industrial maintenance. It ensures a healthy environment for employees and patrons all the while readying your business for the next stage of development. It can be difficult, however, when deciding what method should be used to perform it. But don’t waste your […]

Why Hydrodemolition is Best for Bridge Deck Repairs

Construction repair on bridge decks is no easy task. The process of repairing bridge decks is a strenuous and tedious one as maintaining its structure can be difficult. Bridge deck repairs will require that the old concrete platform be replaced without the removal of steel or beam structures. Workers can do this through various processes, […]

Everything You Need To Know About Industrial Hydro Blasting

Hydro Blasting is a little-known construction technique that can be used for a wide variety of applications. For the most part, it’s used for cleaning thick dirt and debris that can build upon a number of industrial surfaces. From the inside of a tank to a large area of concrete, hydro blasting can be used […]

What Is Hydrodemolition?

What is hydrodemolition? Hydrodemolition is an environmentally friendly concrete demolition solution! By using ultra high-pressure water jet equipment instead of standard concrete-removal tools, it is pollutant-free. This gentle but mighty method for concrete removal also ensures safe concrete removal without affecting steel substructures and other critical parts of the building. What is Better About Hydrodemolition? […]

Why Choose Clean Sweep for Tank Cleaning

Benefits Of Tank Cleaning Regardless of your industry, tank cleaning is necessary to keep operations running smoothly. This ensures that all equipment is running at its optimal level, and allows for all issues to be identified and rectified before the issues become greater. In order to provide the best hydro blasting service possible, we offer […]

Hydrodemolition: Concrete Removal That Is Safe, Efficient, & Cost Effective

In today’s modern working conditions, cost-effectiveness, safety, and efficiency are greatly emphasized. When it comes to concrete removal and refurbishment, Hydrodemolition is the go-to solution. Over time, concrete tends to become structurally deficient due to the vulnerability of deterioration. Therefore, the need for concrete maintenance and refurbishment is needed. Using only high-pressure water, safely and […]

How Hydroblasting Can Benefit Industrial Equipment

When it comes to cleaning industrial equipment, hydroblasting is the go-to service. At Clean Sweep, we proudly provide the most powerful hydroblasting techniques to fully ensure the overall efficiency and cleanliness of your industrial equipment. Our hydroblasting techniques are capable of utilizing 5,000 to 42,000 PSI of water pressure. The high-pressure water and fine-tuning ensures […]

How To Remove Rust And Corrosion With Water

Rust comes from the presence of water between iron or steel. This is commonly referred to as oxidation or corrosion. Rust destroys the material of metal causing significant damages over time. This is a financial concern as much as it is a safety risk. So when you need rust removed quickly, look no further than […]

Preparing Concrete With Water Blasting

A Clean Way  To Prep Concrete When it comes to high-pressure water blasting services, one concern usually arises. Will the process inject water into the concrete slab during the surface preparation? i.e. Will it damage my concrete? The answer is absolutely NOT. When preparing concrete surface with water blasting, the water never penetrates the concrete. […]

The Many Advantages of Hydrodemolition

So many companies today are becoming lifelong partners because of the many benefits gained from Clean Sweep’s Hydroblasting. Our waterjet cutting service, Hydrodemolition, continues to provide the best alternative for any demolition projects. The many advantages of hydrodemolition include efficiency, cost-efficacy, and precision when easily removing damaged or unwanted concrete. When you need a professional […]

When To Consider Hydroblasting

The quickest and cleanest alternative to traditional grit blasting is hydroblasting. From cleaning small surfaces to cutting through metal, no other method safely and successfully removes coatings without damage to the area. Clean Sweep’s hydroblasting is an environmentally safe option for indoor and outdoor surface cleaning, ensuring the best results. Here we will discuss when […]

Hydroblasting for Surface Preparation

Proper surface preparation is important for the immediate and long-term success of concrete sealants. Guidelines for the proper preparation of a concrete surface include removing any old layers and complete decontamination of the surface. This can be done most easily and effectively with hydroblasting for surface preparation- a water jet cleaning service offered by Clean […]

Revitalizing Commercial Property With Hydroblasting

Commercial Property Hydroblasting Hydroblasting is a cleaning method which uses the sheer force of water pressure from an industrial motorized hose to clean surfaces, particularly those with hard-to-reach spots or tough stains. Hydroblasting is effective for commercial properties because it does not use any abrasives or chemicals, leaving the public space free of pollutants. Clean […]

What is Hydroblasting?

What is hydroblasting? Hydroblasting is also referred to as hydrodemolition, hydro milling, water blasting, or water jetting and is a mechanism for cleaning external and internal surfaces, primarily concrete. It relies on the energy of water striking a surface to achieve its cleaning outcome. Hydrodemolition provides an excellent bonding surface for repair material and new […]